Cordless Nailing Tool, 40V, Nail Length 15mm~40mm, Magazine Capacity 100pcs, 1.9kg

Makita Nailing Tool FN001GZ
The Nailing Tool Makita FN001G 40V Max XGT Brushless is a 40mm cordless, 18 gauge nail gun powered by a 40V Max XGT Battery. This powerful nailer is suitable for 15-40mm nails and is capable of driving up to 5000 nails from a single 2.0ah battery. The Nailing Tool also includes depth adjustment, a Built-in LED light that illuminates the work area., and an easy-to-see nose tip so that you can be sure of the precise placement along with a low recoil mechanism that prevents fatigue and injury. The handle has been designed to be comfortable and ergonomic, and a magazine window allows one to keep track of what size is in the magazine. The brushless motor, along with the 40V Max XGT battery, increases the efficiency of the nailer.
Makita Nailing Tool Features:

High power to drive brad nails up to 40 mm; 35 mm into hard materials such as red oak.
Drives 6 different lengths of 18 gauge pin nails (15 mm (5/8 inch), 20 mm (3/4inch), 25 mm (1inch), 30 mm (1-3/16inch), 35 mm (1-3/8inch), and 40 mm (1-5/8inch)); magazine capacity up to 100 nails.
The Cordless Brad Nailer from Makita has a Driving depth adjustment feature for precise measurements.
Anti-dry fire mechanism: Engineered to prevent driving blanks and damage to the work surface.
Ergonomically designed handle with soft rubberized grip provides increased comfort.
Compact design for easy use when working in tight spaces and corners
Rapid fire 18Ga brad nails between 15-40mm (5mm increments) thanks to 40V Max Brushless motor.
Ultra-compact & lightweight at only 2.6kg in weight with a 2.0Ah.
Counterweight mechanism: Reduces vibration by moving a counterweight in the opposite direction of the hammer.
The battery protection system provides over-discharge, temperature, and current protection for enhanced performance, battery cycle life and overall battery life
The trigger lock-off feature prevents accidental firing for increased operator safety.
Durable, reversible belt clip convenient for temporary tool hanging.
Well-balanced design for reduced operator fatigue.
Extreme Protection Technology: Engineered to channel away dust and water for increased durability, offers maximum protection against dust, debris and liquids for optimal performance in extreme conditions.
Contact top designed easy nail placement: The nail shooting port is located in the center of the contact arm, enabling accurate nail placement.
Contact arm mechanism: The contact arm mechanism enables continuous nailing and drag nailing.
Led Joblight – Once the trigger switch is engaged the light will turn on & the light will turn off 10 seconds after releasing the trigger illuminating the workpiece.
Anti-Dry Fire – Once the remaining nails become low trigger switch can no longer be depressed until the nail magazine is re-filled. This protects the internal components from damage should it fire without nails.
Depth Driving Adjustment – The depth of nailing can be adjusted by turning the adjuster. Scrolling the adjuster up will sink the nail further into the material & scrolling down will make the nail sit proudly.

Makita Nailing Tool Accessories

Nose Adapter
Safety Goggles
Belt Clip
Hex Wrench

Note
Tool only (without Batteries & charger)

Capacity / Length: 15, 20, 25, 30, 35, 40 mm
Capacity / Gauge: 18 Ga
Magazine Capacity / 100
Vibration Level / 2.5 m/s² or less
Sound Pressure Level / 81 dB(A)
Sound Power Level / 92 dB(A)
Dimensions (L x W x H) / 234 x 86 x 243 mm (without battery)