Cordless Drill And Screw Driver, Brushless Motor, Drill Chuck 13mm, 18V x 5.0 Ah , 2000 rpm, 54 Nm, 1.8kg

Makita Drill And Screw Driver DDF484RTJ
If we talk about The powerful 18V Makita Drill And Screw Driver that is fully equipped to efficiently and accurately perform screw and drill jobs, of course, we mean DDF484RTJ from Makita. With the 2 included 18V batteries, you always have a fully charged battery on hand. The Drill And Screw Driver 5.0Ah battery makes it a powerful version that you can work with for a long time. The maximum speed of 2000RPM stays constant under heavy load, thanks to the brushless motor. This helps you work with control in hardwood especially if you use the 21 torque settings and 2 mechanical speed settings of the DDF484RTJ properly.
The Makita Drill And Screw Driver DDF484RTJ is a tough little beast of a drill driver, from the aluminum gear housing to the all-metal gear construction. It may weigh just 1.8kg (without battery) and it’s built to take a knock. Plus the brushless motor is more able to withstand job site abuse into the bargain.
In addition to this, the chuck is, of course, keyless and there are twin LED lights above the trigger to shed loads of light on whatever you’re working on, ideal for the back of kitchen cabinets. And finally, as we expect from Makita, the grip is ergonomic and any area of the drill where you’re likely to have your hands is rubberized which helps with comfort while reducing vibration.

Powerful features:
Drilling capacity: Up to 38 millimeters in wood, it is suitable for making large drill holes…..
Battery capacity: Thanks to the Battery capacity of 5.0 Ah you can work extra long on 1 full battery…..
Extra Batteries: Supplied with two powerful 5.0AH li-ion slide batteries, giving extra reserves of power when required, with electronic overload, overheating and deep discharge protection, and self-cleaning contacts that guarantee optimum power transfer…..
LED lights: The bright LED work light allows you to get into low light areas around the site, with pre-glow and afterglow functions……
Lightweight: All metal gear construction and aluminum gear housing allows safe easy control……
Protection electronics: The protection electronics switch off the machine in the event of an overload to prevent the engine from being burnt out or from electronic control…..
Ergonomic handle Ergonomic downward narrowing handle with soft grip upholstery, with patented handle-enhancing ridge profile that distributes the force evenly over all fingers……..
Storage Case: Supplied in a sturdy, stackable storage case in abs with reinforcement ribs, with a locking system to connect several cases.
Features a forward and reverse: 18v drill driver includes forward and reverses action, electric brake, x2 mechanical gears, and variable speed trigger control.
Brushless motor: Maintenance-free brushless motor with electronic control delivers more torque, maintains full force when turning left, and resists more work with the same battery capacity.

Drill And Screw Driver Features

Robust and powerful all-around drill driver for medium-duty drilling and screw-driving work.
Delivers more drilling, driving, and fastening speed.
Aluminum gear housing creates an impression of rigidity and luxuriousness.
Variable 2-speed for a wide range of drilling and fastening applications.
Battery level indicator on the accumulator.
Robust gearbox housing made of die-cast aluminum.
More control by the electric motor brake that the machine stops immediately when the switch is released.
Compact and ergonomic design at only 172 mm long
BL motor delivers 54 N·m of max torque
BL motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
BL motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life
BL motor efficiently uses energy to match torque and RPM to the changing demands of the application
Lightweight for reduced operator fatigue
21 Clutch settings and a drill mode for added fastening control
The best possible ergonomic handle with a soft grip for driver-drill applications
Extreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions
Convenient 13 mm (1/2Iinvh) keyless chuck for quick bit changes
The battery protection circuit protects against overloading, over-discharging, and over-heating
Mechanical 2-speed gearing; High speed mode for speedy drilling in light duty applications; Low speed mode for heavy duty applications requiring high torque
Electric brake for maximum productivity and increased operator safety
The reversing switch is conveniently located. Durable, reversible belt clip convenient for temporary tool hanging

Drill And Screw Driver Accessories

Battery BL1840B x 2pcs
1 Charger
Plastic Case
Belt clip
(+)(-) bit

Brushless motor
Extreme Protection Technology (XPT)
Variable Speed
Reversing
Brake

Capacity Masonry / 13mm
Capacity Steel / 13mm
Capacity Wood / 38 mm
Fastening Capacities / High Tensile Bolt: M10 – M16
Square Drive / 12.7 mm (1/2 inch)
No Load Speed (RPM) / 0 – 2,200 / 0-1,900 / 0-1,200 / 0-500
Impacts Per Minute (IPM) / 0-2,700 / 0-2,400ipm / 0-1,700 / 0-1,000
Max Fastening Torque / 700 N·m
Dimensions (L x W x H) / 170 X 81 X 276 mm
Net weight / 2.7kg