Demolition Hammer, Impact 48.9J, 1850W, 1300ipm, 19.2kg

Makita Demolition Hammer HM1511X1
The HM1511 Breaker from Makita is designed specifically for demanding chipping, demolition, and breaking tasks, while minimizing vibration to enhance user comfort. This model features Anti-Vibration Technology (AVT), which includes an internal counterbalance system aimed at significantly reducing vibrations. It serves as an excellent choice for substantial structural demolition, such as breaking up driveways and footpaths, in addition to landscape and trench work, asphalt removal, driving ground rods, and various other applications.
Makita Demolition Hammer Features

L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced
48.9 J AVT SOFT NO LOAD Electric Breaker, 30 mm Hex Shank
Both drastically increased power and low vibration are achieved with a minimum increase in tool size and weight
Powerful 1,850 W motor delivers 48.9 J (EPTA-Procedure 05/2009) of impact energy to handle the most demanding applications
Despite the drastically increased power, Anti-vibration housing, Active dynamic vibration absorber, and Soft no-load keep the vibration lower than that of the HM1317C series, allowing for efficient chipping for a long period
Extended life brushes are longer for more work between service intervals and less downtime.
Easy-to-operate slide switch increases productivity and allows for continuous use.
Double insulated.
High Impact Energy of 48.9J of impact energy for rapid drilling and chipping applications, thanks to the redesigned hammering mechanism and increased motor power
AVT Anti-Vibration Technology delivers unbelievably smooth performance at just 6.5m/s 2 vibration, thanks to the active dynamic vibration absorber and vibration-absorbing housing
Soft Start breaker starts smoothly, then rapidly accelerates to maximum speed to reduce the initial start-up shock
Soft No Load motor speed is decreased to reduce vibration. Once the load is detected, the motor increases speed to the maximum impact rate
Side Handle can be swung 360 360°on the vertical and secured at any desired position. Providing complete control in any application

Makita Demolition Hammer accessories

Side Handle. (The tool does not come with a bit.)
Plastic Carry Case.

Ergonomic soft grip handle provides increased comfort
Soft start suppresses start-up reaction for more control and better accuracy
Automatic brush cut-off protects commutator from damage for longer tool life
Easy-to-operate slide switch increases productivity and allows for continuous use
Variable speed control dial enables user to match the speed to the application for greater versatility

Continuous rating Input / 1,850W
Impact Energy / 48.9 J (EPTA)
Blows Per Minute (BPM) / 1,300
Dimensions (L x W x H) / 781 x 130 x 266 mm
Net weight / 19.2 kg
Power supply cord / 4.0 m