Rotary Hammer SDS Plus For Concrete, Steel, Wood, 2 Operation Modes, 800W, 2.8kg

Makita Rotary Hammer SDS Plus HR2600
Makita Rotary Hammer SDS Plus HR2600 26mm, Powered by a Powerful 800W Motor, provides 1,200 rpm. This Rotary Hammer features 2-operation modes (Hammering with rotation and rotation only.). Rotary Hammer SDS Plus has a compact and lightweight tool design, and an ergonomically designed handle with a rubberized soft grip provides more control and comfort. In addition, double insulated to protect the user, Variable speed allows the user to control the speed. The torque limiter reduces gear damage, and the dust collecting system helps provide a cleaner work environment and ensures reliability and long life.
Powerful Features:
Double insulation: Double or reinforced insulation is another method of protection against electric shock, consisting of an extra layer of supplementary insulation over the basic insulation, or the live parts. Double insulation devices protect the user through two independent isolation systems. These systems protect electric motor components from the outer motor housing and tool-holding areas.
Variable speed: Variable speed control allows the user to match the speed to the application they are working on.
Reversing: After drilling, setting the bit direction to reverse spins it counterclockwise to help it come out of the hole cleanly and easily. You’ll also use reverse mode to quickly remove screws and other fasteners.
Torque Limiter: A torque limiter is a built-in clutch that reduces gear damage by disengaging gears if the bit binds.
Dust Collecting: The dust collector is designed to reduce the amount of dust produced during cutting and concrete dust generated during drilling on the job site, allowing you to work efficiently and comfortably.
Makita Rotary Hammer SDS Plus Features:

2 Operation Modes: Hammering with rotation & Rotation only.
Easy-to-grip handle ergonomically designed to give maximum power thrust.
Reverse function on brush holder.
Large trigger switch.
Adapted for SDS-PLUS Shank.

Makita Rotary Hammer SDS Plus Accessory:

Side Grip.
Depth Gauge.
Carry Case.

Note: The tool does not come with a bit.
Double Insulation
Variable speed
With reversing function
Torque limiter: The drill stops when the bit hits against reinforcements
Ergonomic handle

Continuous rating Input / 800W
Capacity / Concrete : 26mm (1″)
Capacity / Steel : 13mm (1/2″)
Capacity / Wood : 32mm (1-1/4″)
Impacts per minute (ipm) / 0 – 4,600
No load speed (rpm) / 0 – 1,200
Dimensions / 361 x 77 x 209mm
(L x W x H) / (14-1/4″x3″x8-1/4″)
Net weight / 2.8kg (6.1lbs)
Power supply cord / 2.5m (8.2ft)