Cordless Impact Driver, 40V, Hex. Shank 1/4 inch, 0-3700rpm, 210Nm, 1.7kg

Makita Cordless Impact Driver TD003GA201
The Makita 40V Max Brushless Impact Driver – the definitive tool for professionals in search of power and accuracy within a compact design. With its 4-speed power selection and innovative T-Mode for self-drilling screws, this impact driver provides unmatched versatility. Featuring a robust 210Nm maximum torque, it easily tackles even the most challenging tasks. Eliminate bit wobble with improved anvil stability, guaranteeing precise fastening every time. The constant speed control function ensures reliable performance, irrespective of battery capacity, allowing you to work without interruptions. Measuring only 121mm in length, it is ideal for confined spaces where maneuverability is essential. Discover the Makita TD003G – where power, precision, and compact design unite to enhance your work efficiency.
Makita Cordless Impact Driver Features

High power 40Vmax XGT Li-Ion battery reduces the current load on the controller, allowing for continuous heavy-duty operation.
Precision fastening with enhanced anvil stability for less bit wobble.
Compact length of only 121mm, ideal for working in tight spaces.
A combination of sufficient fastening performance and high cost-competitiveness is achieved by carefully selecting the functions.
Aluminum hammer case + Black bumper.
4 speed power selection and T-Mode for tightening self-drilling screws.
Max fastening torque: 210 N·m.
The extended overall length ensures sufficient performance of the hammer.
To turn on the light, set the F/R change lever in the neutral position, then pull the switch trigger. To turn off the light, pull the switch trigger again.
The light turns off automatically one hour after turned on.
Excellent performance in continuous heavy-duty operation.
Constant speed control allows the tool to operate at the same speed as that at which you operate the tool on a fully charged battery, even when the remaining battery capacity becomes low.
A smoother installation of the bit has been achieved by reducing the resistance against the insertion of the bit.
By increasing the load of the sleeve holding spring, we have reduced the chance of unexpectedly falling off the bit.

Makita Cordless Impact Driver Accessories

2 Batteries
1 Charger
Makpac Connector Case

Low power consumption thanks to brushless motor
The rubber grip on the handle ensures a good working grip
Battery protection system automatically shuts off power when the battery level is low
LED light illuminates the work site
Dust and water resistance for operation in harsh conditions

Capacity / Machine Screw: M4 – M8 | Standard Bolt: M5 – M16
Capacity / High Strength Bolt: M5 – M14 | Coarse thread : 22 – 125 mm
Hex Shank / 6.35 mm (1/4″)
No Load Speed (RPM) / Max / H / M / S: 0 – 3,700 / 3,200 / 2,100 / 1,100 T mode:0 – 2,400
Impacts Per Minute (IPM) / Max / H / M / S:: 0 – 4,100 / 3,600 / 2,600 / 1,100
Max Fastening Torque / 210 Nm
Fastening Torque / Hard / Med / Soft: 170 / 50 / 20 N·m
Dimensions (L x W x H) / 121 x 86 x 245 mm
Net weight / 1.0 kg (without battery)