Drill Machine Rotary hammer, 1,010W, 760 rpm, 3,100 ipm, 5.8kg

Makita Drill Machine Rotary hammer HR3530
The Drill Machine Rotary Hammer Makita HR3530 35mm, is powered by a 1,010W motor that provides 760 rpm and 3,100 ipm to increase efficiency. This Drill Machine Rotary hammer has been developed as a compact and lightweight design but with high drilling/chipping performance. The handle is ergonomically designed with a rubber grip that gives you better control and comfort. Additionally, for added safety, the Rotary Hammer features Double Insulation to protect the user, a Torque Limiter reduces gear damage by disengaging gears if the bit binds, and Dust Collecting reduces the amount of dust produced during cutting.
Powerful Features:
Double insulation: Double or reinforced insulation is another method of protection against electric shock, consisting of an extra layer of supplementary insulation over the basic insulation, or the live parts. Double insulation devices protect the user through two independent isolation systems. These systems protect electric motor components from the outer motor housing and tool-holding areas.
Torque Limiter: A torque limiter is a built-in clutch that reduces gear damage by disengaging gears if the bit binds.
Dust Collecting: The dust collector is designed to reduce the amount of dust produced during cutting and concrete dust generated during drilling on the job site, allowing you to work efficiently and comfortably.
Makita Drill Machine Rotary Hammer Features:

High work efficiency.
Compact and lightweight design.
No Hammering when idling because the air in the cylinder is not compressed unless the tool is pressed against the ground. This function ensures the machine’s long life
An ergonomically designed handle with a rubberized grip provides more control and comfort.
Auto cut-out carbon brush, When the Carbon Brush wears out, it will automatically stop the motor. It protects the commutator and indicates the time for maintenance.
Aluminum housing provides high quality and toughness.

Makita Drill Machine Rotary Hammer Accessory:

Side Grip.
Depth gauge.
Carry Case.

Note: (Tool does not come with bit.)
Compact and lightweight design with high performance
Ergonomically designed with a rubber grip for more control and comfort
Double Insulation protects the user
Torque Limiter reduces gear damage
Dust collecting to reduce the amount of dust produced during cutting

Continuous rating input / 1,010W
Capacity / Concrete (with Core bit) 105mm (4-1/8 inch)
Impacts per minute (ipm) / 3,100
No load speed (rpm) / 760
Sound pressure level / 91dB (A)
Sound power level / 102dB (A)
Vibration level / Chiseling 12.5m/s²
Vibration level / Hammer drilling 19.5m/s²
Dimensions (L x W x H) / 374x100x243mm (14-3/4 inch x 3-15/16 inch x 9-9/16 inch)
Power supply cord / 5.0m (16.4ft)