Electric Drill Machine, 10mm, 320W, 56Nm, 1500rpm, Variable speed, 1.3kg

Makita Electric Drill Machine HP0300
Electric Drill Machine HP0300 10mm, is powered by a powerful 320W motor that delivers up to 22,500 BPM, 1,500 rpm, and 56 Nm maximum fastening torque. This Electric Drill Machine allows fully variable speed control with a 2-variable speed controlled by a trigger to enable the user to match the speed to the application, a low-speed mode designed for light-duty fast drilling applications, and a high-speed mode for heavier applications requiring higher torque. The Electric Drill Machine with An ergonomically designed soft grip handle assists with overall safe control and lower fatigue during an extended shift. In addition, double insulated to protect the user, Reversing feature to quickly remove screws and other fasteners, and 20 torque settings for added fastening control for a wide range of applications.
Powerful Features:
Double insulation: Double or reinforced insulation is another method of protection against electric shock, consisting of an extra layer of supplementary insulation over the basic insulation, or the live parts. Double insulation devices protect the user through two independent isolation systems. These systems protect electric motor components from the outer motor housing and tool holding areas.
Variable speed: Variable speed control allows the user to match the speed to the application they are working on.
Reversing: After drilling, setting the bit direction to reverse spins it counterclockwise to help it come out of the hole cleanly and easily. You’ll also use reverse mode to quickly remove screws and other fasteners.
Mechanical 2-Speed: Mechanical 2 speed gearing selection switch allows the operator to operate at high speed for fast drilling applications and low speed with high torque while drilling large diameter holes.
Torque Setting 20: 20 clutch settings and a drill mode for added fastening control and for a wide range of drilling, fastening and hammer drilling applications.
Makita Electric Drill Machine Features:

Excellent usability and compact
Compact and lightweight design.
2 sleeve keyless Drill chuck allows for easy bit installation/ removal by one hand.
Ergonomic handle with soft grip for driver-drill applications.
Variable speed control by trigger.

Variable speed control by trigger
Double Insulation to protect the user
Ergonomically designed handle with soft grip
2-speed modes to enable the user to match the speed to the application
Reversing feature to quickly remove screws and other fasteners

Continuous rating input / 320W
Capacity / Concrete 8 mm
Capacity / Steel 10 mm
Capacity / Wood 28mm
Chuck Capacity / 1.0 ~ 10 mm
No Load Speed (RPM) / High 0 ~1,500
No Load Speed (RPM) / Low 0 ~ 450
Blows Per Minute (BPM) / High / 0 ~ 22,500
Blows Per Minute (BPM) / Low 0 ~ 6,750
Max Fastening Torque / Hard 56.0 N·m
Max Fastening Torque / Soft 21.0 N·m
Max lock torque / 42.0 N·m
Vibration Level / Impact Drilling into Concrete 12.5 m/s²
Vibration Level / Drilling into Metal 2.5 m/s² or less
Sound Pressure Level / 82 dB(A)
Sound Power Level / 93 dB(A)
Dimensions (L x W x H) / 235x67x206 mm
Power supply cord / 2.5 m