Start pressure From 1.5 Bar to 5 Bar Pumped liquid Domestic clean water Liquid temperature From 4 to 60 ºC Approvals/certificates CE, EAC Maximum output power 2000 W Ambient temperature Up to 55 ºC Max. pressure 10 bar Frequency 50/60 Hz Voltage 230 Volt Rated current 10 Ampere Motor degree of protection IPX4D Motor insulation class F Electric cable WithoutOverview: Engineers and pump experts recommend installing two pumps (one duty + one stand-by) to ensure that water will not cut out when the pump is out of service Start. We are honored to offer the best and innovative solution to control, start and stop two pumps by one simple small device and easy to install and use. The device exchange work between the two pumps automatically (The automatic change the duty pump between the two pumps at every start). This protects the pumps and prevents the block failure that occurs when a pump stops working for a long time. No need to install a control panel with complicated design Adjustable start pressure (From 1.5 to 5 Bar) Cut off pressure at one Bar higher than the start pressure (This is to ensure that the water pressure in the network does not rise to high pressures, which may cause damage to old pipes or bidet sprayer. Non return valve inside the automatic Protect the pump against dry running Automatic restart after dry running Totally enclosed for protection against the rain water and dust with protection degree IP65 Works efficiently in high ambient temperature up to 55 C and high humidity up to 98% Special offer: 2 years warranty including replacement (Limited time offer) Spare parts and service centers at Al Zamil main branches Made in Italy This product is Subject for delivery and installation policy Please review the policy. Click here