Epoxy Sealer

Recommended use

• Recommended to use as a sealer coat for exterior and interior applications on concrete and cement surfaces where excellent sealing and protection properties are required. It is also recommended as a prime coat for concrete and cement floors.
• Spread rate: 7 m²/L.

Product benefits

✔️ Excellent adhesion to concrete and cement surfaces
✔️ Seals pores and prevents moisture and chemical absorption
✔️ Highly resistant to salts and alkalis
✔️ Excellent resistance to water and harsh chemicals
✔️ Protection against scratches and abrasion
✔️ Superior hardness and long-lasting durability
✔️ Lead-free

How to use

? Surface Preparation:

• Ensure the surface is clean, dry, and strong.
• Remove any old paint, oils, or salts.
• Light sanding or vacuum sanding is recommended to achieve a CSP2-3 level.

?️ Application Steps:

• Mix the base component with the hardener at a ratio of 2:1 until a uniform color is achieved.
• Use a short-pile (3/8-inch) epoxy roller or a stiff nylon brush for tight spaces.
• Do not apply unless the concrete moisture content is less than 4%.

⏱️ Drying Time:

• Completely dry within 8 hours.
• The next coat can be applied after 18 hours (maximum 7 days).
• ⚡ Note: The pot life of the mixture is approximately 45 minutes at 30°C. Do not use it after that.