Powder Putty

A superior quality primer and undercoat paint based on modified alkyd resin. It is characterized by close pores and strong adhesion. It can be used directly as a primer on wood or intermediate coat on concrete and steelworks where smooth surface is required.

Recommended use

• Applied on precast wall panel or smooth concrete surface.
• For repairing cement-lime plasters inside / outside the building.
• It may be applied both to fill deep losses (e. g. chases after installation work) and to smooth the plaster surface.

Product benefits

✔️ Easy to mix and apply – just add water
✔️ Safe for indoor and outdoor use
✔️ Strong adhesion to walls, plaster, and concrete
✔️ Does not crack or shrink after drying
✔️ Water and moisture resistant after drying
✔️ Gives you a smooth, elegant surface with minimal effort
✔️ Suitable for holes, cracks, and even full leveling

How to use

? Surface Preparation:

• Clean the wall of dust, oil, old paint, or any impurities.
• For new surfaces: Make sure they are clean and lightly damp.
• For old surfaces: Scrape and peel off any flaking paint or materials before priming.

? Mixing Method:

• Add a 25 kg bag to 9-10 liters of water.
• Mix with a mortar until a smooth mixture is formed.
• Use the mixture within 3 hours only.

?️ Application:

• Apply the first coat using a putty knife.
  Leave it to dry for 8 to 10 hours.
• Lightly dampen the wall and apply the second coat.
• After drying, sand with 320-grit paper to achieve a smooth surface.
• Clean the surface and apply a coat of Techno Acrylic Primer.
• Then, apply the final paint according to the desired system.