Solvent Epoxy

Recommended use

• Recommended to use as a general propose interior coating on steel and concrete floor surfaces for decoration and protection.
• Spread rate: 7.4 m²/L.

Product benefits

✔️ High resistance to corrosion, abrasion, and scratches
✔️ Excellent resistance to salts, alkalis, and strong acids
✔️ Excellent resistance to solvents and chemicals
✔️ Excellent adhesion to concrete and steel surfaces
✔️ Hardness and an elegant semi-gloss finish
✔️ High resistance to pressure and harsh indoor conditions
✔️ SASO 2881/2017 approved

How to use

? Surface Preparation:

• Remove any oils or salts using high pressure.
• Sand the surface to a Sa 2.5 (SSPC-SP10 standard).

?️ Application Steps:

• Mix the base and hardener at a ratio of 4:1 until you obtain a homogeneous mixture.
• Use a suitable roller or high-pressure sprayer.
• Ensure the surface is clean, dry, and has a humidity of less than 4%.

⏱️ Drying Time:

• Surface Dry: Within 8 hours.
• Complete Dry: Within 24 hours.
• Second Coat: After 24 hours.
• Final Strength: Within 7 days.
• ⚡ Note: The pot life of the mixture is approximately 6 hours at 25°C.