Electrical Conduit Guide for Saudi Projects: PVC, EMT, RGS, Flexible Conduit and Boxes
Which electrical conduit fits which location? PVC, EMT, RGS and flexible conduit explained, plus boxes, a comparison table, and price range and median including 15% VAT from Almadah's catalogue as of 19/11/2026.
Short answer: Conduit is the pipe that protects and routes wiring in or on walls. Four types cover most jobs: PVC for concealed first-fix, EMT (light steel) for exposed indoor runs, RGS (heavy galvanized steel) where impact or weather is a risk, and flexible conduit for the final connection to AC units and motors. All terminate in boxes.
What types of electrical conduit are there, and where does each one go?
Choosing the wrong type costs more than the price difference: PVC where it gets knocked breaks, and RGS in an ordinary concealed run is money wasted. A quick map:
| Type | What it is | Typical location | In the catalogue |
| PVC | Rigid plastic conduit in light, medium and high-impact grades | Concealed first-fix in walls and concrete slabs | 2.9 m lengths, from 20 mm to 50 mm and above |
| EMT | Thin-wall steel tube (UL 797) | Exposed indoor runs, above false ceilings, commercial fit-out | About 3 m lengths, from 1/2 inch |
| RGS | Heavy galvanized rigid steel (UL 6) | Outdoors, impact-prone areas, plants and sites | 3 m lengths, from 1/2 inch up to larger sizes |
| Flexible conduit | Flexible steel or plastic, some liquid-tight | The last stretch to an AC unit, motor or machine | Coils or cut lengths, from 1/2 inch and up |
Each type comes with its fittings: couplings, bends, connectors, straps and clips. They are what makes the run complete.
*Bahra 20 mm PVC conduit, among the most requested pipes in the category.*
What is the difference between PVC, EMT and RGS conduit in use?
The rule of thumb most contractors follow: PVC for what is buried, EMT for what is seen indoors, RGS for what is exposed to impact or weather.
- PVC: The cheapest, lightest and easiest to cut and install; it does not rust or conduct. Its weakness is impact and heat, so it is graded (light, medium, high) and the higher grade is chosen wherever knocks or heavy pours are likely.
- EMT: Light steel that is cut with a cutter, bent with a bender, and joined with connectors and couplings, with no threading. It gives better mechanical protection than PVC at a lower cost than RGS, and is not normally used in wet or buried locations without suitable fittings.
- RGS: Thicker wall, threaded, and joined with threaded fittings, so it tolerates impact and harsh conditions. It is the most expensive and heaviest, and the slowest to install.
- Flexible conduit: Not a substitute for the three above and never the main route. It is a short length that absorbs vibration and lets equipment move.
*Al Jazeera RGS rigid steel conduit, 1-1/4 inch.*
How much does conduit cost, and what is the real median for the category?
Category price range (including 15% VAT, as of 19/11/2026):
- Cheapest item: SAR 0.20 (clips and small accessories)
- Median price: SAR 36.05 for the whole category; the median for "PVC pipes and boxes" is SAR 34.50 and for "Flexible conduit" SAR 45.65
- Highest: SAR 67,009.35 (large assemblies and panels, not residential conduit work)
The median shows what you will pay for a typical item. The arithmetic mean is distorted by a few large industrial pieces, so we do not rely on it.
And these are prices for complete lengths in common sizes, same date, VAT included:
| Conduit | Price range (SAR) |
| Bahra PVC 20 mm (light to high-impact, 2.9 m) | 3.22 – 4.52 |
| PVC 25 mm | 4.65 – 6.04 |
| Bahra PVC 50 mm high-impact | 21.07 |
| EMT 1/2 inch (UL 797, about 3 m) | 14.95 – 17.25 |
| EMT 3/4 inch | 20.70 – 21.14 |
| RGS heavy steel 1-1/4 inch (UL 6) | 96.60 |
| Flexible steel conduit 1/2 inch (per piece) | 45.42 |
| Bahra flexible steel conduit 1/2 inch, 30 m coil | 107.33 |
Prices change as suppliers update; confirm on the product page when you buy.
What are first-fix and junction boxes, and how do they relate to conduit?
Every conduit run ends or branches at a box. A first-fix box (such as Legrand Batibox) is set into the wall to hold a socket or switch; a junction box gathers wires at a branch or makes pulling easier; IP55 boxes serve outdoor locations exposed to dust and water. Choose the box by the series and size the socket will be fitted to (see our sockets and switches guide).
*Legrand Batibox single box, 58 mm deep, for concrete first-fix.*
When do you need flexible conduit, and why is it not a main route?
AC units, pumps and motors vibrate and move slightly, and rigid conduit cannot take that at the connection point. So the rigid run stops short of the equipment at a box or connector, and a short flexible length completes the final stretch. Where water or oil spray is possible (plant rooms, rooftops, pumps), choose the liquid-tight type with a dedicated connector.
*Crouse-Hinds flexible conduit connector, 1/2 inch.*
Which brands are available in this category?
ITCC, Crouse-Hinds, Bahra and Legrand lead in range, followed by Greenlee, Panasonic, Iga, Raychem and Alfanar. The most requested items to date (19/11/2026) are Bahra PVC conduit in 20 and 25 mm, plastic bends, junction boxes, and Legrand Plexo waterproof boxes.
How do I estimate the conduit and boxes I need? (quick method)
- Route: Measure each circuit from the distribution board to the last point, then add about 10% for bends and waste.
- Number of lengths: Divide by the pipe length (2.9 m for PVC, about 3 m for EMT and RGS) and round up.
- Size: 20 mm for ordinary lighting and socket circuits with few conductors, 25 mm and above for more conductors. Do not pack the conduit full; leave enough room for pulling, and let your consultant fix the permitted fill for your project. (A dedicated article on size capacity follows in this cluster.)
- Boxes: One box per socket or switch point, a junction box at every branch, and avoid too many bends between two boxes.
- Fittings: Order slightly more bends, couplings and clips than you calculate; one missing piece stops the crew.
Follow the Saudi Electrical Code and your project specification throughout, and confirm types and sizes with the consultant before approval.
Frequently asked questions
What is the short difference between PVC, EMT and RGS?
PVC is plastic for concealed first-fix and the cheapest; EMT is light steel for exposed indoor runs; RGS is heavy galvanized steel for impact and outdoor use and the most expensive.
Can I use PVC for the whole first-fix of a villa?
Yes for most concealed work in walls and concrete slabs, choosing a medium or high-impact grade where knocks are likely. Exposed areas prone to impact are better served by steel.
Which PVC size should I choose for lighting and sockets?
20 mm is typical for small circuits and 25 mm for more conductors or easier pulling. The final decision follows the number and size of conductors in your project.
When should I use EMT instead of PVC?
When the run is exposed indoors (false ceilings, commercial fit-out, workshops), when you need better mechanical protection, or when the consultant specifies a metal route.
What do UL 797 and UL 6 mean on steel conduit?
They are US product standards: UL 797 for EMT and UL 6 for RGS heavy steel conduit. You will see them in product names and datasheets so you can confirm compliance.
What is liquid-tight flexible conduit?
A jacketed flexible steel conduit that keeps water and oil away from the conductors. It is used at pumps, outdoor AC units and rooftops, with a matching connector.
Can I bend conduit on site?
Yes for EMT and PVC with a bender sized for the pipe (a PVC pipe bending tool is available in the catalogue). RGS needs heavier benders. Avoid sharp bends that crush the pipe and make pulling difficult.
How do I know a first-fix box suits the socket I will fit?
By the number of modules, the box depth and the wall type (concrete, block or plasterboard), and from a series that matches the chosen socket and plate.
Conclusion
Choose conduit by location: PVC for buried, EMT for exposed indoor, RGS for impact and outdoors, and flexible conduit only for the final connection. Count fittings and boxes together with the lengths from the start. The category median price is SAR 36.05 including VAT (19/11/2026).


