Wall Anchor Types (Fischer Plugs): Plastic, Metal or Chemical — Which for Which Wall and Load?
Which anchor for hollow block, solid block and concrete? A table matching wall type to anchor type (plastic, metal, chemical) and load class, with median VAT-inclusive prices from Almadah's catalog (17/11/2026).
Short answer: The wall decides the anchor. Plastic is for light loads in concrete and solid block, a long-expansion nylon anchor is for hollow block, metal (sleeve or drop-in) is for concrete and medium loads, and chemical is for heavy loads. The median plastic anchor at Almadah is SAR 10.96 including VAT (17/11/2026).
Which anchor suits each wall type and load class?
| Wall | Suitable anchor | Load class |
| Hollow block (the most common in Saudi construction) | Long multi-purpose expansion nylon anchor (e.g. Duopower) or a mesh sleeve with an anchor; an ordinary short plastic plug will not hold | Light to medium |
| Solid cement block | Plastic anchor sized to the screw; metal anchor for medium loads | Light to medium |
| Plain concrete | Plastic for light loads; sleeve or drop-in anchor for medium loads | Light to medium |
| Reinforced concrete (slabs, columns) | Metal anchor; chemical anchor for heavy or critical loads | Medium to heavy |
| Plasterboard and hollow partitions | Gypsum anchor or Molly expansion anchor | Light |
| Fixing rebar or threaded rod into concrete | Chemical anchor | Heavy |
This table is selection guidance, not a load calculator. The real maximum load depends on anchor diameter, embedment depth, concrete strength and drilling quality, so read the load table in the manufacturer's data sheet for your exact product. For critical loads (suspension systems, lifting, facades) consult the responsible engineer rather than selecting by guesswork. We deliberately do not state a load figure here.
What is the difference between plastic, metal and chemical anchors?
- Plastic (nylon or polypropylene) expands inside the hole as the screw enters and grips the hole wall by friction. Cheap and easy, suited to light loads: light shelves, hooks, cables, lightweight curtains. Quality varies widely between types.
- Metal expands mechanically. A sleeve anchor expands as you tighten the nut or bolt; a drop-in anchor is set into the hole and then expanded with a setting tool. Suited to concrete and medium loads, and holds far more than plastic.
- Chemical is a cartridge or capsule of resin that fills the hole and bonds a threaded rod to the concrete once cured, so it does not rely on expansion. It is the choice for heavy loads, positions close to a concrete edge, and post-installed rebar. The hole must be cleaned thoroughly, and the cure time before loading is set by the manufacturer.
Which anchor works in Saudi hollow block?
Hollow block has thin outer walls with a void between them, so a short plastic plug spins in the hole or drops through when the screw reaches the void. The usual fixes:
- A long expansion nylon anchor that expands in the void or knots behind the thin wall, such as the Duopower line in our catalog.
- A mesh sleeve with a fixing mass for larger holes or higher loads. This is often combined with a chemical anchor in hollow block for heavier loads.
- Drill without hammer action, or with very little, so the thin block wall does not crack.
- Test on a hidden spot before final fixing if the load is more than light.
When do I need a chemical anchor for heavy loads?
Choose one when:
- The load is heavy or subject to vibration or pull-out (machine bases, high warehouse racking, balustrades, suspension rods).
- The hole is close to a concrete edge, where an expansion anchor could split the concrete.
- You are fixing rebar or threaded rod into existing concrete.
- The wall is hollow block and the load exceeds what nylon can take (with a mesh sleeve).
As of 17/11/2026 the Almadah catalog does not list chemical anchor cartridges (epoxy or vinylester) as a standalone product, so we state no price for them. If your project needs them, request a custom quotation, and confirm the product is approved for cracked or reinforced concrete as your site requires.
How much do anchors cost in Almadah's catalog?
| Type | Price range (SAR) | Median (SAR) |
| Plastic anchors (Fischer and similar) | 0.92 to 27.66 | 10.96 |
| Gypsum anchors | 0.46 to 49.83 | No median (small sample) |
| Metal anchors (sleeve, drop-in, iron expansion) | 0.14 to 18.41 | 0.75 |
| Chemical anchors | Not listed as a cartridge | — |
Prices include 15% VAT, from Almadah's catalog on 17/11/2026, for published, approved, in-stock products only and after any active discount. The range is wide because the selling unit differs: some items are priced per single piece (so you will see SAR 0.14 for one sleeve) and others per box or bag of several pieces, so do not compare two prices before reading the selling unit on the product page. Use the median, not the average. Prices move with suppliers and discounts, and we do not promise a fixed price.
How do I choose anchor diameter and length and install it correctly?
- Match diameter to the drill bit: a 6 mm bit for a 6 mm anchor, and so on; an oversized hole weakens the grip.
- Drill deeper than the screw length by about a centimeter so dust can collect without blocking the anchor.
- Clear the dust from the hole by blowing and brushing, especially for metal and chemical anchors, since dust sharply reduces holding strength.
- Pick a screw long enough to pass through the full length of the anchor and extend slightly beyond it.
- Never exceed the manufacturer's recommended load, and allow a safety margin for any load with people beneath it.
- For critical loads consult the responsible engineer and the Saudi Building Code that applies to your project.
For choosing the right drill and bit for the wall, see standard drill vs hammer drill vs SDS.
Which brands are available in anchors and fasteners?
Fischer leads the anchor range in Almadah's catalog and appears in the titles of most plastic and iron anchors. The remaining items are generic with no clear brand. In the wider screws and fasteners branch you will also see Grainger Approved, Makita and TAS. The order reflects the number of items available on 17/11/2026, not quality. "Fischer" here is a company name that the market uses generically for a plastic wall plug.
What are the best-selling anchors?
As of 17/11/2026 we have no anchor sales record in the store that supports a "best seller" ranking, so we do not claim one. Many contractor purchases are placed as direct orders rather than through the cart.
FAQ
What is the right anchor for hollow block?
A long multi-purpose expansion nylon anchor, or a mesh sleeve with a fixing mass for higher loads. An ordinary short plastic plug does not hold well in it.
Can a plastic anchor take heavy loads?
No. It is for light loads (light shelves, hooks, cables). Use metal for medium loads and chemical for heavy ones.
When should I use a chemical anchor?
For heavy loads or loads subject to vibration or pull-out, near concrete edges, and for fixing threaded rod and post-installed rebar into concrete.
What is the difference between a sleeve anchor and a drop-in anchor?
A sleeve anchor expands as you tighten the nut or bolt directly. A drop-in anchor is set into the hole, expanded with a setting tool, and then a bolt or threaded rod is screwed into it.
What is the median price of a plastic anchor at Almadah?
As of 17/11/2026, including VAT: SAR 10.96, in a range from 0.92 to 27.66 depending on the selling unit.
Does the store list chemical anchor cartridges?
As of 17/11/2026 the catalog does not list chemical anchor cartridges as a standalone product. Request a custom quotation for your project.
How do I find the maximum load of an anchor?
From the load table in the manufacturer's data sheet for your exact product, diameter, embedment depth and wall type, not from the product title.


