تخطَّ إلى المحتوى الرئيسي
المرتجعات ومشترياتك

Fasteners, Locks and Handles Guide: Anchors, Screws and Smart Locks

اقرأ هذا المقال بالعربية

Guide to fasteners, locks and handles at Almadah: five branches (hinges and handles, screws and anchors, door locks and cylinders, door closers, door stops), available brands, and price range and median including VAT as of 15/11/2026.

Fasteners, Locks and Handles Guide: Anchors, Screws and Smart Locks

Short answer: Fasteners, locks and handles are the parts that fix things in place and secure and operate doors. Almadah's catalog splits them into five branches: hinges and handles, screws, nails and anchors, door locks and cylinders, door closers, and door stops and fittings. The category median price is SAR 31.94 including VAT (15/11/2026).

What are the five branches and what is the price range of each?

BranchWhat it coversPrice range (SAR)Median (SAR)
Hinges and handlesHinges, door handles and pulls, drawer slides, carpentry fittings0.20 to 6,325.0034.50
Screws, nails and anchorsScrews, nails, anchors, fixings and fastening tools0.10 to 58,222.2612.65
Door locks and cylindersRim locks, cylinders, mortise locks and smart locks0.12 to 7,999.0040.25
Door closersDoor closers in different sizes and power ratings3.45 to 2,400.00323.25
Door stops and fittingsDoor stops and installation fittings1.96 to 5,759.8746.00
Prices include 15% VAT, taken from the Almadah catalog as of 15/11/2026, for published and approved products only and after any active discount. The ranges are wide because one branch mixes low-cost items with industrial equipment, so rely on the median rather than the upper bound. The category-wide median is SAR 31.94.

Drawer slide with roller, silver, 35 cm

What is an anchor (wall plug) and how do I choose the type for my wall?

An anchor is inserted into the wall so a screw can hold where the wall alone would not. Plastic anchors suit light loads in solid walls, metal anchors suit medium and heavy loads in concrete, and chemical anchors bond the rod to the wall with resin for heavy loads or hollow masonry. Choose by wall material and load together. A dedicated anchors article with a "wall, then anchor, then load" table is coming in this cluster.

Iron garden screws

Which metal should I choose for screws and nails in humid or coastal conditions?

Thin galvanized steel can rust quickly in humid, salty coastal cities. Stainless steel lasts longer outdoors and in damp areas, and for coastal sites the more corrosion-resistant grade (316) is preferred. Inside dry buildings, galvanized is enough for most work. The screws, nails and anchors branch carries different head types and metals, and Makita and TAS are its most present brands.

What is the difference between a cylinder, a rim lock and a mortise lock?

The cylinder is the keyed core and can be replaced on its own without changing the whole lock. A rim lock is fitted on the face of the door and suits steel doors. A mortise lock is recessed into the door body, giving stronger security and a cleaner look, and it needs a door of suitable thickness. A dedicated comparison of types and security levels is coming in this cluster.

Iron rim door lock, ISEO gold 70 mm

Are smart locks available, and what should I check before ordering?

Yes. The door locks and cylinders branch includes smart and fingerprint locks alongside conventional ones. Before ordering, check door thickness, swing direction and handle type, plus the power source and how the battery is replaced. An article on smart locks in hot, dusty conditions is coming.

Which brands are most available in this category?

For handles and hinges, Lozan, Kale and Terrador are present. For locks and cylinders: Kale, Terrador, Montana and ISEO. For fasteners: Makita and TAS. Ranking reflects how many items are listed in the catalog as of 15/11/2026, not quality.

Which products have actually been ordered in this category?

Order history here is limited, so we do not claim "best seller" in a broad sense. Highest ordered quantities as of 15/11/2026: a separate aluminium square door handle in bronze (22 units) and a silver drawer slide with roller, 35 cm (22 units), followed by separate door handles at 11 and 10 units. Many contractor purchases are placed by direct request rather than through the cart, so this is only a partial indicator.

Separate aluminium door handle, square, bronze

How do I read and compare prices?

Compare within the same branch and item type, and look at the median before the range. For example, the median for screws, nails and anchors is SAR 12.65 while the median for door closers is SAR 323.25, because the first is small parts bought in quantity and the second is mechanical door hardware. Prices change with suppliers and discounts, and we do not promise a fixed price.

FAQ

What are the branches of the fasteners, locks and handles category?

Five branches: hinges and handles, screws, nails and anchors, door locks and cylinders, door closers, and door stops and fittings.

What is the difference between plastic, metal and chemical anchors?

Plastic anchors suit light loads in solid walls, metal anchors suit medium to heavy loads in concrete, and chemical anchors bond the rod to the wall with resin, which suits heavy loads and hollow masonry. The full comparison is in the anchors article in this cluster.

What is the difference between a cylinder, a rim lock and a mortise lock?

The cylinder is the keyed core that can be replaced on its own, a rim lock is fitted on the face of the door, and a mortise lock is recessed into the door body for stronger security and a cleaner look.

Which metal should I choose for screws and fixings in humid or coastal conditions?

Stainless steel resists humidity and salt better than thin galvanized steel, which can rust quickly. For coastal sites prefer the more corrosion-resistant grade (316).

How do I choose a door closer?

Choose by door weight, width and traffic, and check the power rating on the product card. The door closers branch at Almadah lists units in several sizes and power ratings.

Does Almadah carry smart locks?

Yes. The door locks and cylinders branch includes smart and fingerprint locks alongside conventional ones. Check door thickness and swing direction before ordering.

What is the price range for fasteners, locks and handles?

The category median is SAR 31.94 including VAT as of 15/11/2026. The range is very wide because one branch mixes low-cost screws with industrial fastening equipment, so compare within the same branch.

Which brands are available in this category?

For handles and hinges: Lozan, Kale and Terrador. For locks: Kale, Terrador, Montana and ISEO. For fasteners: Makita and TAS.

Related articles